Bienvenidos a Hidro Equipos y Quimicos

IT'S ESSENTIAL THAT A POOL ALWAYS BE IN SANITARY CONDITION; FOR THIS, IT'S NECESSARY TO FOLLOW THE FOLLOWING 3 STEPS:

A	Apply a product that acts on bacteria and microorganisms (chlorine) and that remains in the water.
B	Regulate the acid and alkaline (pH) level.
C	Remove solids that give different hues to the water of our pool.

However before adding any product, we need to know the conditions of said water.	And the only technically acceptable way of doing that is by obtaining an analysis of the water with an appropriate test kit.
In addition, observethe degree of transparency (existing solids).

HOW TO CARRY OUT EACH PROCESS AND WITH WICH PRODUCTS?

ELIMINATION OF BACTERIA AND MICROORGANISMS (CHLORINE)

HIDROCLOR 91, and ALKLOR. are chlorines with a 91% and 75% available chlorine concentration, respectively; the storage of these products represents no danger since they are packaged in airtright plastic containers.

Each different form is fabricated keeping the different types of users in mind (no one is better than any other). That is to say, due to the high dissolution that the powder offers, as opposed to the other forms, it acts more rapidly (frequently-used pools). The granules are recommended for pools of average use or seldomly-used pools.

The tablets are better-suited to least-used pools as well as to those wich use automatic chlorinators.

INSTRUCTIONS FOR USE

Take a sample of the pool water up to the line shown, apply the yellow indicator and observe. The test kit will indicate to you if you are applying the correct amount.

The best time to apply the product is in the evening or at night and the amount will vary according to how many users there are, what the temperature is and how dirty the pool is.

Periodically it is important to perform chlorine shocks, each month; that is to say, to apply a chlorine which is different from the one we commonly use, using from 4 to 5 times the amount normally used. The most appropriate product is AKLOR.

Besides saving us a bundle on the price of chlorine and brightener (BRILLAN), this process will keep the pool clearer and cleaner.

In the event that the bathers show signs of:

Irritated eyes or skin.
loss of color to bathing attire.

One of the probable factors is that we have exessive chlorination. Check the test kit.

REGULATION OF ACID OR ALKALINE (pH) LEVEL

pH PLUS, SUPER PLUS AND MINUS ADJUSTER

The pH serves to determine if a substance is acid or alkaline and it is assessed on a scale from 1 to 14. In the treatment of water for pools, the range should remain between 7.2 and 7.6 The appropriate way to measure it is with a test kit.

IT'S IMPORTANT TO KEEP THE POOL'S pH LEVEL ON THE SCALE CORRECT (7.2 - 7.6)

INSTRUCTIONS FOR USE

Take a sample of water from the pool up to the line shown, apply the red indicator and observe. The test kit will indicate to you if its is necessary to increase, decrease or if you are at the right pH range.

HAVING THE RIGHT pH LEVEL WILL SAVE YOU TROUBLE

Murky water: because better use will be gotten out of the chemical products since these are made to work in a neutral enviroment.	Corrosion: since an acid enviroment eats away at walls and metals over time.
Caked-on grime: hard water or water with a high pH level backs up pipes and stains walls and accesories.	It's recommendable to measure the pH level at least once a week.

REMOVAL OF SOLIDS FROM OUR POOL

Solids accumulate in the pool because of replacement water lost through natural evaporation, leaving behind these solids as a result, as well as because of outside agents that fall in.

THE WAY TO SOLVE THIS PROBLEM IS BY MEANS OF TWO PROCESSES

FILTERING EQUIPMENT

Start filtering with adequate equipment, wich will remove all undissolved solids. .

BRIGHTENER (BRILLIAN)

If the filtering equipment has worked normally and shows signs of murkiness, this is a clear sign that we have dissolved solids; these are very small particles that, due to their size cannot be retained by the equipment and so begin accumulating.

INSTRUCTIONS FOR USE

This product serves primarily to eliminate different hues and murkiness from the water. It works by encapsulating all the dirt or organic matter, making it thicker, so that once the filter is used, it will be able to retain all this waste, which it will eliminate through the backwash process.

Turn on the filtering equipment (if the equipment is already working, keep it going)

Valve to filter position

Valve to backwash position

It's important to mention that because of its biodegradable formula, this product represents no risk to the equipment and it's possible to apply it at any time since it doesn't affect bathers, either; it even works while you are enjoying your pool.

It's also an excellent algae killer, is compatible with the other chemical products and, working together with HIDROCLOR 91 or ALKLOR, it increases the microbe-killing action of both.

In the event that this product doesn't provide the desire results, it's possible that the filtering material in your equipment has become saturated or has deteriorated. In the event that it has become saturated, backwash it thoroughly, In the event that it has deteriorated, replace it.